Header
   

Western Tool & SupplyWTS WAMR End Mills

WAM and WAMR (the R stands for rougher) end mills are used in high efficient milling (HEM) tool pathing strategies for improved Material Removal Rates (MRR), and reduce roughing cycle times as much as 70%. View the WAM & WAMR Guide for more details, or view WAM end mills below.

Shortcuts

DECIMAL PART NUMBER CUTTING DIA SHK DIA LOC OAL # Of Flutes Corner Radius Coating
0.375 WAMR2646840 3/8 3/8 1/2 2-1/2 3 0.030 ONX*
0.375 WAMR2646841 3/8 3/8 7/8 2-1/2 3 0.030 ONX*
0.375 WAMR2646842 3/8 3/8 1-1/4 3 3 0.030 ONX*
0.5 WAMR2646843 1/2 1/2 5/8 3 3 0.030 ONX*
0.5 WAMR2646844 1/2 1/2 1-1/8 3 3 0.030 ONX*
0.5 WAMR2646845 1/2 1/2 1-5/8 3-1/2 3 0.030 ONX*
0.625 WAMR2646846 5/8 5/8 3/4 3-1/2 3 0.030 ONX*
0.625 WAMR2646847 5/8 5/8 1-1/2 3-1/2 3 0.030 ONX*
0.625 WAMR2646848 5/8 5/8 2 4 3 0.030 ONX*
0.75 WAMR2646849 3/4 3/4 1 4 3 0.030 ONX*
0.75 WAMR2646850 3/4 3/4 1-5/8 4 3 0.030 ONX*
0.75 WAMR2646851 3/4 3/4 2-3/8 5 3 0.030 ONX*
1 WAMR2646852 1 1 1-1/4 5 3 0.030 ONX*
1 WAMR2646853 1 1 2-1/4 5 3 0.030 ONX*
1 WAMR2646854 1 1 3-1/4 6 3 0.030 ONX*

*ONX is a proprietary coating developed to reduce friction and improve chip flow.