|Class “X” Gage Sets (.0001 Steps)||Nominal Diameter Range||Length||Price|
|.0052” - .0247”||1-7/8”||$287.40|
|.0248” - .1080”||2-1/4”||$124.40|
|.1081” - .3872”||2-1/2”||$149.40|
|.3873” - .6375”||3”||$190.40|
|.6376” - .8370”||3-1/2”||$262.40|
|.8371” - 1.0119”||3-1/2”||$294.80|
|Size marked Insul-Grips on sizes .0070” thru .0589”||Sizes from .0040” thru .1800” do not have a center relief.|
The Deltronic Class "X" Gage set is a unique combination of plug gages that has become a basic measuring tool (along with gage blocks, micrometers and indicators) for the metalworking industry.
Here's why —
Exceptional Flexibility of Sets
The range of gages, in each set, offer hundreds of combinations for qualifying hole sizes in or around the nominal size. You can choose any combination of Go/No-Go tolerances, or use the range to find the exact size of a hole. They provide standards for zeroing comparators, setting snap gages, micrometer checking, hole center and layout determination, precision arbors for staging parts and/or checking runout of blanks.
Many manufacturing facilities, in consideration of the virtually unlimited applications and low set costs, have provided duplicate sets to each department concerned with cylindrical gaging requirements. In doing this, they have established, for all their Q.C., Prototype, Receiving and Production functions, a single, common, gage tolerance!
Single, Certified Tolerance
All Deltronic Class "X" Gage sets contain a "Certificate of Accuracy" that unconditionally guarantees: (a) each gage to be within a size tolerance of plus .000,040", minus nothing; (b) surface finish approximately one microinch; (c) both ends concentric to one another; and (d) specifies NIST traceability through gage blocks calibrated directly by NIST
Wide Selection of Sets
Over 10,000 sets are available from Deltronic's stock of finished gages in every .0001" size from .0040" thru 1.0120". Hole sizes common to every segment of the metal working industry have dictated the nominal sizes of stock sets in increments of .001", .0005" and .0001" (i.e., in stock, .0001" increment sets nominals are every 64th fraction from 1/64 to 1", and all Letter and Number drill sizes). Sets with other nominals may be purchased, in these increments, at same prices as stock sets.
These same stock sets in multiples covering a wide range of most-used sizes, are available in stock Gage-Libraries, which offer the low set prices plus free Stor-Gage metal cabinets.
Dust/Rust Protective Case Has Detailed Markings
The broad center strip of each set case is marked for location of the nominal gage and the exact slot location of each gage by increments. Each size-marked gage is easily located and replaced to maintain the order of the set. The clear plastic lid of each set is labeled to identify: Set Type (THS25, TP25, etc.); Nominal Gage Size; Increments (.001", .0005" or .0001"); and Limits of Range covered (smallest and largest sizes in set). The double label makes this information visible from both the front and top of the case.
All gages and gage sets are stocked by Deltronic for the Same-Day-Shipment. And to insure the day by day working integrity and availability of your set after purchase.